Number of limited access roads
Number of surface roads
Full in all directions
Estimated number in UK
First built in UK
This is not so much one design of junction as a whole range of related options that, individually, have all sorts of names. Their common feature is that they provide a free-flowing junction to terminate one motorway on another without using any loops. The difference between them is how many times the sliproads cross over each other, and whether the junction is designed to be spaced out, rising only two levels high, or more compact with sliproads stacked up three high. The illustration above shows a three-level example, but with some rearrangement it could be built on two levels over a larger area.
Regardless of how exactly you choose to build it, the resulting junction is free-flowing and reasonably fast, with no trumpet-style loops to slow traffic down.
For a long time CBRD referred to all these interchanges by the name "directional T", and that's what this page used to be called, but that name is really a specific term for a variant of the junction that doesn't exist in the UK. "Triangle" is the British term for one of the most common types, and all of them form a triangle between three roads, so perhaps it's the most appropriate. A full triangle, like at M5/M6 Ray Hall Triangle or the junctions at either end of the M18, is made up of three fork junctions with a triangle of linking roads between them.
The earliest junction of this type in the UK is the M6/M55 interchange north of Preston, opened in 1965. It has three levels of roadway.
Why build one?
The simplest reason is that one motorway needs to terminate on another and the junction must provide access in all directions and handle large volumes of traffic. Where a roundabout interchange would not provide a free-flowing connection, and a trumpet has limitations on its capacity due to the looped sliproad, a triangle will keep everything moving at top speed.
One significant advantage is that this type of junction can be configured to give priority to specific flows of traffic. With a trumpet, when you approach the junction on the terminating road you must take the left sliproad to turn left and the right sliproad to turn right. What if the vast majority of your traffic is going left? In that situation it would make more sense to have the main carriageway of your road turn left, and have right-turners leave on a sliproad: a triangle junction will let you do that.
Equally you can mix and match the priority of your roads, choosing an arrangement of sliproads that best suits the traffic flows.
One of the more overlooked benefits of this junction type is that it requires very little space opposite the terminating road. A trumpet interchange needs space for a big loop, but a triangle has very little impact on whatever is at the other side of the major route. That makes it suitable in urban areas or where the through road runs up against an obstacle like a parallel railway line or a river.
- Handles high volumes of traffic with ease.
- Easy for the motorist to use.
- Design can be adjusted to suit almost any situation.
- Usually more expensive than a comparable three-way junction like the trumpet.
- May involve difficult or complex bridge structures.
- Difficult to expand or increase capacity.
This is an interchange that is all about the variations.
With thanks to David, Dave Robinson and Peter Edwardson for information on this page.